Firebox and firepan sketches, etc. Post them here.....

View previous topic View next topic Go down

Firebox and firepan sketches, etc. Post them here.....

Post by DaveLathrop57 on Mon Jul 15, 2013 8:11 pm

Here's a sketch of a horizontal single burner used in a real end location with draft tubes through the firepan, cast refractory lining, and a brick arch.


DaveLathrop57

Posts : 242
Join date : 2013-04-14
Location : North Carolina, USA

View user profile

Back to top Go down

Re: Firebox and firepan sketches, etc. Post them here.....

Post by DaveLathrop57 on Tue Jul 16, 2013 12:45 pm

The gentleman who msent me the sketch above also sent this explainatory email:

My concept is that you have a large number of small
tubes so the air flow is broken as much as possible. They do slightly point away
from the burner radially. The burner again should have a radial or in line flow
with the air pipes. The whole concept is to recreate the heating effect in the
bottom of the fire box as close to that as a coal burner as possible as in
multiple small fires round each of the air pipes just like the holes between the
lumps of coal?

DaveLathrop57

Posts : 242
Join date : 2013-04-14
Location : North Carolina, USA

View user profile

Back to top Go down

and some from the 1906 Cyclopedia

Post by DaveLathrop57 on Tue Jul 16, 2013 2:26 pm


DaveLathrop57

Posts : 242
Join date : 2013-04-14
Location : North Carolina, USA

View user profile

Back to top Go down

More sketches from the same gentleman

Post by DaveLathrop57 on Wed Jul 17, 2013 7:04 pm

Horizontal burners this time.


DaveLathrop57

Posts : 242
Join date : 2013-04-14
Location : North Carolina, USA

View user profile

Back to top Go down

Horizontal installed on rack locomotive

Post by DaveLathrop57 on Wed Jul 17, 2013 7:06 pm


DaveLathrop57

Posts : 242
Join date : 2013-04-14
Location : North Carolina, USA

View user profile

Back to top Go down

More flat horizontal burner drawings and sketches

Post by DaveLathrop57 on Wed Jul 17, 2013 7:16 pm


DaveLathrop57

Posts : 242
Join date : 2013-04-14
Location : North Carolina, USA

View user profile

Back to top Go down

Re: Firebox and firepan sketches, etc. Post them here.....

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum